Monday, November 12, 2012

How To Fix PC Monitor

Display Damaged and Hang 
  The problem that often occurs is that after a while the computer life, suddenly appeared dots or colored pixels on a monitor that ultimately lead to computer crashes and hangs. The problem as above, usually associated with either the computer temperature problem in general or specifically on the graphics card. Moreover, if the computer you're using a modern graphics card is usually faster heat. To overcome the problem of broken or hanging display, perform maximum cooling efforts. Then check the fan function on your computer is still running normally. Some types of modern video cards have fans attached directly to the card. If necessary, move the cards are a little different to the slot opposite the slot graphics card in order to provide sufficient air circulation. Monitor Flashing When Used 
At the time the computer is actively used, frequent blinking monitors. It seems due to the frequency of the image on the screen is too low. This can occur because of a problem with the refresh rate settings on your computer. Refresh rate is the maximum capacity that made the monitor to display the frames in one second. Setti proper refresh rate will give comfort to our eyes that use it. Because the monitor has a refresh rate of the monitor as small will make moving and unstable. To set the refresh rate, use the Display Properties menu. You do this by right-clicking on any place on your desktop, and then on the menu that appears click the Properties option. After appearing Display Properties, select the Settings => Advanced and click Adapter. This section will display the desired refresh rate option. Try some of the refresh rate to get the best option for your monitor. 

 Blue patches on the corner of the monitor In one or more corners of the monitor, appears colorless spots or a bluish appearance is quite disturbing. Spots appear colorless or color kebiru0biruan on one corner of the monitor is a fairly common problem. This problem is caused by the magnetic field generated by electronic devices from multiple monitors. To try to eliminate use of existing features on the menu degaussing control monitor. If you've tried and no improvement, then the latter should take it to a technician.  

No comments:

Post a Comment