Dismantling PC

1. Prepare a Phillips screwdriver () and regular screwdriver (-)
 
2. Open chasing first PC
Set aside chasing bolts so as not to lose

3. Disconnect the power cables are connected to the power supplay
To remove the wires do not pull the cord but hold the cable grip and shake left-right or front and back if you want to take it off.

4. Disconnect the cables IDE Floppy disks and CD Room of chasing
5. Disconnect the cables from the motherboard front panel
 
6. Remove VGALepaskan VGA (Video Graphics Adapter), soud card installed on the motherboard.
 
7. Remove the module RAM (Random acsess Memory) from the slot motherborad.
To remove the RAM using the thumb and middle finger to hold the key to the RAM slots. Press until it clicks then grab RAM

8. Open bolts motherboard.

9. Remove the processor fan from the motherboard.
To remove the fan, but can use hands open horizontally so that the fan is not broken foot after the open lift

10. Remove the processor from the motherboard.
To remove the processor open tap and slide the hook processor, the processor but do not ever take hold gold that is on the back of the processor.
How to Assemble a PC
1. Prepare chasing and installing power supplay
 
2. Install the motherboard
Tighten the screws securely to the motherboard so that the position of chasing, attach I / O first
 
3. Plug the cable connector

4. Replace the processor and heatsink paste
In mounting the processor to processors follow the signs towards the golden triangle d processors. Put the pasta taste above processor and processor lock by pressing the lever in order to fit the position of the processor.


5. Insert the memory module

6. Insert a floppy disk, hard disk, and a CD ROM drive
 
7. Installing power connectors
 
8. Replacing the data cable
 
9. Replacing the power cable to the PC, mause, keyboard
 
10. Close chasing PC