CD drive has been installed, but when viewed in Windows Explorer is the CD Drive is not detected.Troubleshooting the problem is that there are several problems that prevent terditeksinya CD Drive by computer. Those problems anatar others:1. Driver CD damagedYou can deleting the old driver for the CD drive and replace it with the new drivers using the Driver Manager.
2. Cables connected to the CD Drive is not installed properlyUnloading chasing and check the cables attached to the CD Driver. Are the cables are plugged correctly. There are three wires that are stuck on CR Drive power cable, data cable, and audio cable. Check also plugged the cables to the motherboard. Do not let anyone loose and not sticking properly.
3. Jumper Setting the wrong CD DriveGo back to the manual, perhatiakan jumper setting to be installed. Jumper setting is important, especially if a single computer has more than one CD drive, such as a CD ROM and a CD RW.
Blue Screen When access Floppy or CD
Windows operating normally. But when will access the floppy disk or CD in windows explorer, blue screen appears and the message:Atotal exception OE has accured at 0028: C002C28F in VDX IFSMGR (01) +00002977. Current application be terminated ...The solution of the above problem is likely the most is the damage to your disk driver. Following steps to try to analyze it:1. Click Start on the Windows taskbar and select settings and Control Panel2. Double click the System icon3. Select the Device Manager tab4. From the list of devices that appears, select Floppy Disk Controler for floppy and select the CD ROM for the blue screen happens to CD5. Select the delete button to remove the current driver6. Then do a reboot windows computer to restart automatically detect an existing driver.
No comments:
Post a Comment