Troubleshooting on Windows failed to Detect Hardware

With the "plug n play" should be able to detect the hardware windows are added automatically. But in fact not the case. In some cases, the plug N play facility failed to detect the new hardware added to the computer.
Windows is equipped with Plug N Play facility is the ability to automatically detect and configure if no additional card or device into the system. But it was the practice then automatic detection still has many shortcomings. Perankat Windows fails to detect new devices are added is not working.
If that happens, there are two alternatives that can be done. The first alternative is by using the Add / Remove Hardware in Control Panel. Perform the following steps:
1. Click Start => Settings => Control Panel
2. Then in the window that appears, double click Add / Remove Hard ware
3. A wizard will help you to detect hardware. If successful, it will display a message that the hardware found.
If it turns out this way does not work, then chances are your BIOS settings need to be set for Plug n Play feature of Windows can run. To set the BIOS settings, perform the following steps:
1. Perform Restart your PC
2. Press the Del key on the keyboard to bring up the BIOS settings
3. If your BIOS from Award Software, look for part OnO / PCI Configurations and press Enter
4. In the PNP OS option Instelled, change the value of "No" to "Yes".
5. Restart the computer again and re-do the detection of your new hardware.
Troubleshooting on Linux