In particular motherboard, memory modules made of different manufacturers are able to compromise or incompatible tdak. Unplug the new RAM and try to reactivate the computer, if the computer working smoothly means that the problem is already clear that the new RAM is not compatible with your motherboard. Replace RAM and search modules from the same manufacturer.
Adding RAM, but Not Detected
The problem is to add more RAM to RAM so expect the same capacity RAM to 128 MB, but when it turns out that the boot process is detected early look boot 64 MB.
The solution is: step Checked this case is similar to the above case settlement. The first step, check the position of the new RAM and RAM-RAM to another. Has it been installed properly in the slot. You could also try a little lower RAM timings dalamBIOS.Test reset computer
The solution is: step Checked this case is similar to the above case settlement. The first step, check the position of the new RAM and RAM-RAM to another. Has it been installed properly in the slot. You could also try a little lower RAM timings dalamBIOS.Test reset computer. If still not detected, check again if you add new RAM proficiency level according to the type of slots available on the computer. Not necessarily RAM that can be entered in a slot meant behwa kompaitibel RAM to be added. For example, SD RAM has a similar slot RD RAM. But RD RAM memory types, no bias was detected although the bias is installed on SD RAM slot types. Consider strongly the suitability of RAM with a slot on the motherboard.
No comments:
Post a Comment